While glass and acrylic do many of the same tasks, they perform differently and have diverse uses. Each has a particular objective, especially regarding framing artwork and photos, the setting in which they will be shown, and the method of display. Framed artwork and photos often hold treasured memories, so it’s crucial to consider how and where they’ll be displayed.
While, at first glance, glass and acrylic may seem very much alike, there are some glaring differences to consider. For instance, glass is heavier and more likely to break than acrylic. Therefore, glass might function better on a table than on a wall. On the other hand, acrylic weighs less than half as much as glass and is ten to 20 times stronger, so acrylic may be more appropriate for displaying bulky or delicate artwork.
Glass’ fragility is by far its worst drawback. To remedy this issue, thicker material is used as the size of the frame increases. Unfortunately, the weight of the glass increases rapidly as it thickens, which can lead to specific issues. Breaking glass usually results in a lot of incredibly sharp edges, providing an immediate threat to anything nearby. Laminated glass can mitigate this issue, but weight and cost are still concerns.
Acrylic is not weighed down with these same issues.
Because acrylic is more flexible than glass, it’s an ideal material for framing or displaying fine art, historical photographs or documents, vintage posters, or any photo or piece of art that carries significant monetary or sentimental value.
Acrylic framing is also an excellent solution for framing pieces that will be displayed outdoors, in high-traffic areas, or in any other place where there is a significant risk of the frame being damaged.
When planning or preparing a framing project, consider the following:
Here are three of the most popular types and applications of acrylic in the context of museums or in-home picture framing:
The matte finish of Non-Glare Acrylic Sheets (also known as P-99) was created to reduce glare and reflection from most viewing angles. Non-Glare Acrylic Sheets are lightweight, simple to construct, and shatter resistant, just like regular acrylic. Artwork, prints, and pictures are frequently displayed in art galleries and museums. Non-Glare Acrylic is available in various thicknesses and sheet sizes, along with some custom-cut options.
The primary purpose of non-glare plastic acrylic panels is to reduce light reflection and glare. Non-glare acrylic sheet is ideal for glazing and framing applications since it is ten times stronger and weighs half as much as glass. It also lends itself to projects and uses where flexibility and convenience of production are essential. In addition, since non-glare plexiglass is inherently resistant to UV radiation deterioration, light transmission loss and yellowing tend not to be major concerns.
At Piedmont Plastics, we specialize in transparent materials like acrylic. Our team of passionate plastics specialists is perfectly equipped to offer the answers you require for your application. Additionally, to assist you in choosing the best material, we have devoted teams of market specialists from various industries, including marine, industrial, specialty vehicles, sign and graphics, and more.
If you want to learn more, please visit our website XISHUN Acrylic.
This special Non-reflective, photographic acrylic is ideal for use in galleries, exhibitions, shops and the home where the strong lighting can often cause irritating glare which detracts from the viewing experience.
Anti-reflective coatings offer improved optical performance by reducing reflection and glare. An anti-reflective ITO coating can be applied to plastic substrates to provide optimal optical properties.
DIAMOND AR, the anti-reflective coating we supply and manufacture, is available on polycarbonate and acrylic substrates, as well as glass.
Standard anti-reflective acrylic sheets (also known as Perspex) are a highly transparent material with non-glare surface on one side which also absorbs destructive UV light.
Key Features:
This special Non-reflective, photographic acrylic is ideal for use in galleries, exhibitions, shops and the home where the strong lighting can often cause irritating glare which detracts from the viewing experience. It is ideal for framing where the image is in direct contact or is touching the anti-reflective acrylic. If the image is not directly touching and completely in contact with the acrylic across the entire surface, it will appear very frosted and distorted – even if the gap is only a few millimetres.
Plexiglas Gallery Anti-Reflective Acrylic sheets have set a new standard for artwork protection that reflects up to 99.7% of UV light. Plexiglas XT Gallery anti-reflective/anti-glare acrylic offers much more protection compared with conventional picture glass (float glass). This material has a finished surface that restricts the reflective qualities often found with gloss acrylics.
In addition, anti-reflective options are also suitable for plastic films. AR Film is an anti-reflective coated PET film, ideal for digital displays and signage.
The AR coating is conductive with a sheet resistance of typically + ohms/sq. The following anti reflective coating options are available from Diamond Coatings:
To find out about our Anti Reflective Coatings for LED Screens please click the link.
To get more information on our products, learn more about their applications, get advice on finding the most suitable product for your specific purpose or to discuss your requirements please contact one of our experts.
For more Anti-Glare Acrylic Sheetinformation, please contact us. We will provide professional answers.